6.5" & 5.25" Adapter Ring Set Application:
- Subaru Legacy / Outback 96-2009 = Front only
- Legacy / Outback 2005+ = Front and Rear
- Subaru Forester 96-2009 = Front only
- Subaru Forester 2009-2011 = Front and Rear
- Subaru Baja 03-06 = front only
- Saab 92x = front only
- Subaru Impreza 1996-2014 = Front only
- Subaru Impreza Hatch 2008-14 = Front and rear
- Subaru Impreza Sedan 2008-2011 = Front only (rear requires custom set, which we can provide upon request)
As seen in Subiesport, iA-Performance is proud to offer our new state-of-the-art injected molded adapter plates (pat. pend.). This item replaces our previous versions of adapter plates.
The factory door design significantly limits your speaker options to the point of having next to no aftermarket choices. Through the implementation of our injected molded adapters you now have the option of running ANY aftermarket speaker while maintaining the factory door covers*. The best part is that they screw right into your factory locations and require zero metal cutting
- 4 Front Rings enough for 2 doors in total. If a 4 door install is desired, then purchase one of our 'Complete' kits
- Installation Kit (mounting hardware, guide, door pins)
|6.5" Cutout Diameter
||6.5" Mounting Depth
|5.0" - 5.90"
Cutout Diameter is the hole size required to fit a speaker into a mounting hole. The Mounting depth is the depth measured from the bottom of the speaker up to the mounting flange. It is also called ‘Top Mount’
*Note: our adapters fit speakers meeting the size requirement chart above. These sizes fit 99% of all speakers in the main stream market. Please consult with your speakers' manufacturer for fitment dimensions.
** Will not fit the following**
- Boston Acoustic S65RC and (speaker mounting holes are too close, can not get all 4 screws in)
- Polk Audio Momo mmc6500 and db651s (speaker mounting holes are too close, can not get all 4 screws in)