|
BLOW-THRU BOOST TUBE MUST BE PURCHASED WITH THIS KIT IF THE FACTORY MAF SYSTEM IS TO BE RETAINED. IF YOU ARE SWITCHING TO MAP YOU DO NOT NEED THE BLOW-THRU BOOST TUBE.
PERRIN Rotated Turbo kits include everything for your properly tuned WRX/STI. PERRIN kits are designed to boltto factory exhaust manifolds, and to factory catback exhaust. Simply add a Perrin front mount intercooler, Perrin injectors and fuel rails, ECU Tuning, Exedy Clutch, Perrin cat-back exhaust and you are ready to claw apart the surface of your local racetrack! All systems have a fully recirculated wastegate dump tube to prevent fire,noise and stench. Included Items: - Rotated Turbo Uppipe
- Rotated Turbo Downpipe
- STI oil line with female fitting (WRX oil line with banjo fitting is ordered separately)
- Gasket set (T3 inlet, Turbo outlet, GT oil drain, 3” gasket, (2) restrictors)
- Banjo Coolant Sets (M14 banjo bolt, M14 banjo fitting, (2) M14 washers)
- GT oil drain flange
- 3/8NPT- 1/2” barb 45 degree fitting
- 10mm x 1.25mm Studs
- M8 x 20 Socket cap screws
- M8 x 25 Socket cap screws
- 1/2”-3/8” reducers
- 1/2”-5/8” reducers
- 3/8” reducer
- #3 hose clamps
- T-bolt 175 size
- 8 PERRIN PYROshield
- 1/2” Fuel hose
- 6 Pushlock coolant hose
- 5/32” vacuum hose
- Zip ties
- Aluminum 3” Turbo Intake (Polished, Red Wrinkle, or Black Wrinkle)
- 3” Silicone Reducer coupler (Black coupler for red, or black pipe and Red coupler for polished pipe)
- 2”-2.25” Silicone Jog coupler (Black coupler for red, for black pipe and Red coupler for polished pipe)
- 3”ID 2 piece air filter
- Size 64 hose clamp
- Size 48 hose clamp
- Size 36 hose clamp
- Size 6 Micro hose clamps
- 1/2” tees
- 1/2” straight connector
- 3/8” Straight connector
- 3/8”-5/16”connector
- 5/32”-1/8NPT fitting
- 1/2” fuel hose
- 1/4” fuel hose
- 5/32” Vacuum hose
- Instructions
Application:
- Fits all STi models 2004-2007, 2005 STI models may require minor grinding of of transmission casting for clearance.
- WRX models 2002+ require the purchase of one additional oil lines and fittings
- All 5 speed transmission vehicles will also require minor grinding of transmission casting and a soft bend in the dip stick sleeve for clearance.
 | 
